Flea-market finds and dollar-a-glass specials can be transformed with monograms, stripes, and whimsical polka dots. All you need is etching cream (available at craft and art-supply stores), masking tape, and a steady hand to cut a template.
When using etching cream, wear plastic gloves and an old shirt with long sleeves, and be sure to work in a well-ventilated area. Start by deciding upon your design. We used masking tape to make the stripes and adhesive hole-reinforcers (for loose-leaf paper) to make the polka dots.
The M stencil was created by enlarging the typeface on a photocopy machine and cutting a stencil. (To make a monogram stencil, place the enlarged letter on a piece of Con-Tact paper, which has a sticky back that will adhere to glass. Trace the letter, then cut it out with a utility knife, discarding the letter itself and reserving the template -- remember to reserve the center cutouts of letters with closed shapes, like O and A.) When applying your design, always clean and dry the glass first; press the design onto the glass, and rub hard.
Using a paintbrush, apply a thick layer of etching cream to the glass. (Avoid spills, since cream will leave permanent marks.) Wait 5 minutes, then rinse off the cream with warm water, and remove the stencil. Practice on a jar until you're comfortable with the process; the cream is simple to use, but for best results, the design must be applied carefully and smoothly.
(via Martha Stewart)
No comments:
Post a Comment